As with any piece of hardware on an engine, when it comes to tuning, it has limitations. Standard injectors are designed to have a specific burn time, so that NOx emissions are kept to the desired level, & with fueling in a specified fuel quantity range in mind. There are however, cost and standard design practices to take into consideration when they design the injectors for a specific application.

With our high performance injectors, we didn’t have a commercially restricted design specification to adhere to, we created specific injector parts to work at high power levels, and gain improvements in every aspect of the fuel injection and combustion process.

High flow, excellent atomisation properties, improved spray patterns & greater efficiency, mean it is possible to run at increased power levels, with reduced EGT & less smoke.
Lower injection duration times & much better fuel atomisation, means you are able to reduce injection advance, improving peak cylinder pressures after TDC & reducing them before TDC.
Fitting these injectors without a remap, will add masses of power, however it is advised that they are calibrated into the ECU for best results, and to avoid engine running issues such as boost control fluctuations and poor idle.

If you have stock injectors and are at the very limit of the injectors, you will find extra performance simply from using a better injector, even at the exact same AFR and fuel injected quantity, due to shorter injection times, thus more fuel is available for useful combustion closer to TDC.

There is no other alternative for improving your injector flow capabilities, increases in fuel pressure above standard specification, simply add more stress on the fuel system and provide only small returns in overall fuel flow, not to mention the extra parasitic loss from the over working of the fuel pump. Fuel pressure should be increased to improve fuel atomisation and is not a remedy for injector flow limitations.

You will be sent 4x performance injectors.  If you wish to send us your current injectors to be modified, please click HERE

All injectors are tested to ensure product quality and so we can provide our satisfaction guarantee.
We provide 18 months warranty with all our injectors, and thus maintain stringent quality assurance measures.

All injectors come supplied with injector compression seals & oil seals.

Depending on product selection, these injectors are suitable for 1.7 Di, 1.7 DTi & 1.7 CDTi engines.