1.3 JTD / JTDm / CDTi / TDCi Multijet Engine Stage 1 Head Bolt Kit
Capacity of up to 30psi boost pressure (tested safe limitation)
Designed to fit the whole range of 1.3 Multijet engines
Scroll down for more product information
7 in stock (can be backordered)
To avoid cylinder head gasket failure, there must be a higher clamping load applied between the cylinder block and cylinder head. This head bolt kit can be used to increase the total clamping force applied, and allow for much higher cylinder pressures and greater injection advance, before the clamping force is overcome by the forces in the cylinder during combustion. It will allow you to run up to 30psi of boost pressure safely, solves issues with head lift, and maintains reliability on your tuned engine.
Comes complete as a set of 10 bolts, 10 washers, installation lubricant & installation instructions.
Thread chaser sold separately HERE
These head bolts are suitable for 1.3 JTD, 1.3 JTDm, 1.3 CDTi & 1.3 TDCi engines.
|Dimensions||20 × 20 × 10 cm|
Only logged in customers who have purchased this product may leave a review.
There are no reviews yet.